> ## Content Index
> Fetch the complete content index at: https://magentadebrief.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# SimFlight rotAIR and pulsAIR review: built for a flight school, sold to a desk
- URL: https://magentadebrief.com/simflight-rotair-pulsair-review/
- Published: 2026-11-01T00:00:00.000Z
- Updated: 2026-11-11T06:30:05.000Z
- Description: The best encoders I have used at this price, built the way a flight school's sim is built. The integration is yours to finish.
- Author: Alan Soon
- Tags: Simulation, #hardware-review

**Magenta Standard verdict** 4.1 / 5 

Superb encoders built to a flight school's method, sold with the integration work still to do.

| Mechanics   | 4.5 / 5 |
| ----------- | ------- |
| Tactility   | 4.0 / 5 |
| Integration | 3.5 / 5 |
| Procedural  | 4.0 / 5 |
| ROI         | 4.5 / 5 |

Reviewed by Alan Soon · 1 November 2026 · Updated 11 November 2026 · Price US$340 before shipping · [Methodology](https://magentadebrief.com/standard/) 

**11 November 2026** — SFSmonitor V6 shipped ten days after this review, adding G5000 support, an SFS-Link installer that removes the Community folder copy described below, single-instance protection and an ADF knob remap. Three sentences in the piece have changed with it. The install paragraph now names the installer beside the manual copy I tested, the avionics answer carries G5000 marked untested, and the loose-module sentence attributes the dropped input to a module sliding under a press rather than to the encoder, which is the mechanism the vendor described and the one I should have written.

No score has moved. The encoders, the plate and the softkey layer are the same parts I tested.

![Two encoder modules and two button modules mounted in a grey desk stand on a wooden desk, with a keyboard in the foreground and a radio stack behind.](https://cdn.synaps.media/magenta/content/images/2026/11/IMG_9264.JPG)

The four modules in the desk stand: a button box at each end, with four encoders between them. (Photo: Alan Soon)

Four boxes arrive from Spain. Two hold twelve buttons each and two hold four encoders each, eight encoders in all, and together they are the knob and button layer of a Garmin panel: radios, heading, course and autopilot under your hands rather than a mouse. The encoder pair is the [rotAIR](https://simflightservices.com/shop/air-modules/rotair/?ref=magentadebrief.com) (as in rotary), the button pair is the [pulsAIR](https://simflightservices.com/shop/air-modules/pulsair/?ref=magentadebrief.com), and the four boxes cost €300, about US$340, before shipping.

The encoders are the best I have used at this price: aluminium collars, deep countable detents, and an inner shaft that turns without dragging the outer ring. The buttons carry the G1000 legends and light blue when pressed.

Then you spend an evening making them work. Most of what is odd about this kit comes out of that evening: four boxes with four cables, a mode chord on each encoder module, a config utility, and five ways into MSFS. None of it is carelessness. It is how a training-hardware company builds a panel, sold to someone who is not building one.

Most people buying this fly the sim to keep procedures sharp between lessons. They aren't building a cockpit, nor do they have the space for one. For them the question is what the kit costs in evenings, and whether the aeroplane comes closer because of it.

Three competitor panels do parts of this job as single boxes. The [Octavi IFR-1](https://magentadebrief.com/octavi-ifr-1-review-a-premium-radio-panel-with-real-world-compromises-2026/) covers radio and autopilot through one dual-axis knob, the [PU Air radio](https://magentadebrief.com/pu-air-korea-radio-review/) does the COM/NAV stack for US$100, and the [WingFlex DAP 500](https://magentadebrief.com/wingflex-dap-500-review/) does the autopilot for US$139\. This set from SimFlight Services covers more of a panel than all three together.

## About this review

SimFlight sent four boxes for review: two of encoders and two of buttons, plus both parts of the desk mount. The company suggested no angle and read this for the first time when it went live. I bought nothing here, I am not paid by anyone, and I'll keep the units. Vendor links carry our own tracking parameter, not an affiliate tag. 

I tested all four modules on the desk plate, in MSFS through SFSmonitor and in X-Plane, on G1000 and GNS 530 aircraft. They are scored collectively as one panel.

## The controls

Everything arrived in its own sealed packaging, which made opening the box feel more like a box of chocolates than a piece of hardware. In the hand each module is about the size of a small remote control. The back of each unit has heat-set brass mounting inserts, done to perfection, and a single USB-C port. The hard plastic is semi-gloss rather than premium, which you stop noticing once the modules are seated.

The encoders are the reason to buy this. Mounted on the heavy plate the click is deep rather than hollow, and it is the part that makes the panel feel like aircraft hardware rather than a toy. Four boxes in a heavy plate also make the best-looking thing on my desk, with the face panels matching the grain and the matte of the metal behind them closely enough that nothing looks bolted on.

The buttons are silicone and carry the G1000-style legends, with the PFD and MFD keys lit blue when pressed and the rest of the unit in white backlight.

![Close-up of two concentric encoder knobs, showing the knurled aluminium rings, the inner shafts and the printed legends PUSH CRS CTR and PUSH PAN.](https://cdn.synaps.media/magenta/content/images/2026/11/IMG_9267.JPG)

The inner knob and the knurled outer ring turn independently, with both functions printed on the face. (Photo: Alan Soon)

## What you are actually buying

A panel builder buys the pack the panel needs, drops each module into a cutout and mounts it flush, with no plate and no stand. The [drawing packs](https://simflightservices.com/wp-content/uploads/2025/07/rotAIR%5FBlueprint.zip?ref=magentadebrief.com) make that explicit: a dimensioned PDF and a DXF you can open in CAD, so you can print a mount or design a panel around the hardware. SimFlight sells the same method one level up as [panelAIR](https://simflightservices.com/shop/air-panels/panel-air/?ref=magentadebrief.com), an 18.4-inch 4K touchscreen that bundles rotAIR, vertical front panels and an app, from €590, shipping in January 2027\. The modules are what you buy when you are not buying the full panel.

The company is [VirtualFly](https://www.virtual-fly.com/?ref=magentadebrief.com), which has built training hardware near Barcelona since 2011 for schools and airlines and sells certified devices and full-motion rigs. [SimFlight Services](https://simflightservices.com/?ref=magentadebrief.com) is its consumer brand, and rotAIR had been on sale about a year before pulsAIR followed. 

A school's installer absorbs all of that once, and the pilot who flies the device never sees it. At a desk at home, you are the installer. The modes exist because a joystick mapping differs between cockpits; the config utility exists because a school's machine may be slower than yours; the five software routes exist because a school's IT infrastructure is not yours either. 

## The bill for the method

Start with the mount. Embedding it in a rig panel needs no accessory; everything else is a separate SKU. The desk mount is a 25-degree stand at €18, with slots that line up with Honeycomb, Saitek and VirtualFly yokes, and a weighted base under it at €18\. A desk needs both.

The plate is worth the money, but it doesn't hold the modules. It is heavy enough that nothing moves under a hand, and the modules sit in it rather than clicking into it, so they have to be screwed down with the knurled thumbscrews in the box. Left loose they shift under your hand, and a module that slides while you press or hold a knob drops input, which made the panel unusable for a whole session. A thirty minute job.

![The mounted panel on its stand on a wooden desk, beside an Apple keyboard and a white mouse, with a monitor behind.](https://cdn.synaps.media/magenta/content/images/2026/11/IMG_9263.JPG)

The modules on the 25-degree stand, with the weighted base underneath and the keyboard where it normally sits. (Photo: Alan Soon)

Then the cables. Each module is cabled separately, so the system ends with four cables leaving the plate and four USB ports consumed. The manuals say an unpowered hub is fine, since at full brightness the encoder boxes draw 220 mA and the button boxes about 210\. You'll run out of connectors, not current.

Then the modes. GlassCockpit and Analog live on each encoder module, switched by holding the push buttons on the first and fourth encoders for three seconds and counting one flash or two. The third, for Air Manager and SPAD.neXt, is on the second module only and uses a different chord. Each module appears to Windows and the sim under a device name that changes with the mode, so the bindings follow it, but nothing on the box tells you where you are. The button modules carry no modes; they switch between G1000, GNS 530 and GNS 430 by pressing PFD, MFD or both.

Then the software. In X-Plane 12.2.1 and later the encoder modules bind natively. X-Plane 11 and earlier 12 need the vendor's .joy files copied into the joystick configs folder. In MSFS the ready-made mapping runs through [SFSmonitor](https://simflightservices.com/shop/air-modules/sfsmonitor/?ref=magentadebrief.com), a free Windows app. On the version I tested, that meant copying SFS\_Link into the Community folder and letting Windows install the .NET Desktop Runtime on first launch. V6 does that from a button in the app, with the manual copy kept as a fallback. The manual called the folder SFS\_Link and the zip unpacked it as SFS-link. I had to ask support. They answered on Discord that night, with a screenshot of where the folder should sit. Fast and helpful, which is not guaranteed in this category. The company's homepage promises no scripts, no external tools and no complex setup, while its own product FAQ says MSFS plug-and-fly is achieved through SFSmonitor.

None of it is compulsory. The device is standard HID, and the [rotAIR manual](https://simflightservices.com/docs/manuals/rotair%5Fmanual.pdf?ref=magentadebrief.com) documents SPAD.neXt snippets, FSUIPC, Air Manager, MobiFlight and Axis & Ohs as well. Choosing one of them is the actual work.

## Where the bill shows up in the flying

All of that is paid once. The same method shows up every time you fly since one set of controls has to serve five avionics. That's the cost in procedural training for students.

The function map is closer to a G1000 than the price suggests. The encoders land on the bezel's own controls — NAV and COM, heading, course and baro, altitude, map range and the FMS knob — and the buttons land on the bezel keys. The six upper keys, direct-to, MENU, FPL, PROC, CLR and ENT, are the same six on a G1000 and a GNS 530\. That is why one box can serve both.

**What the map cannot show is how many jobs sit on each control.** A rotAIR radio encoder carries five: the two rings tune the radio, a press swaps 1 for 2, a hold swaps standby for active, and a press-and-rotate changes one transponder digit. They are printed around the knob face, which is more explicit than most panels here offer, and is necessary given the complexity.

The hold is the one to pay attention to. On a G1000, the swap from standby to active is its own key beside the knob, and on a GNS 530 it is a flip-flop key by the volume. Actual aircraft spend one press on it, but on this panel it is a 1.5-second hold. Not the best behavior for a press you'll make most often.

The softkeys cost more. All twelve sit behind a press of more than 1.5 seconds, with PFD on one button box and MFD on the other, and none is labelled on the hardware. A softkey is a tap with the thumb on the aircraft. Here it is a hold, so a procedure that runs through the softkey row becomes a string of holds, and you have to know which box owns which row. An aircraft softkey also latches black on grey while its function is on, and the strip drops back after 45 seconds without input. The module has neither the latch nor the timer, so the state a G1000 pilot reads at a glance is not there.

**The transponder is a good example.** Four radio knobs carry a digit each, the face reads P&R XPDR (0—), so a code means holding a knob in and turning it once per digit. The G1000 wants XPDR, then CODE, then either 0 to 7 on the softkeys or the FMS knob with a cursor and ENT. The panel's way may be quicker. It is not the aircraft's, so the rep you practice is the panel's.

The cause is the interface rather than the build. One button box has to serve a G1000, a GNS 530, a G3000, a G3X and a GTN750, so each key carries its printed function with a softkey underneath. Garmin's own answer is a separate strip of twelve keys below the screen. That is where a softkey row belongs, and it is the one thing this kit cannot be (the panelAIR's screen is that answer, at twice the price).

**In the Analog configurations the layer shrinks.** A GNS 530 has no softkey row at all; its own pilot's guide never uses the word. The heading bug, the altimeter's baro knob, the OBS knob and each radio get an encoder of their own, one control to one unit. The holds do not disappear, since the knob face still prints HOLD NAV and P&R XPDR, but there is no softkey strip to work through.

We called the [same problem shift mode](https://magentadebrief.com/octavi-ifr-1-review-a-premium-radio-panel-with-real-world-compromises-2026/) on the Octavi IFR-1, and it is what gets between a panel and the practice it promises. SimFlight makes it slightly easier because its chords are printed. That makes them learnable. But it doesn't make them the aircraft's.

## The cockpit it suits

If you fly, or are training on, a GNS 530 or a steam-gauge aircraft, this is the best value I know of for putting the radio, course, baro and autopilot work under your hands. The mapping is close to one-to-one, the encoders are better than the price, and the reps are the ones the aircraft asks for.

The cockpit most student pilot readers here will actually sit in is not a G1000 but aircraft packing steam gauges, a Dynon or at best a G3X. If you fly a G1000, you get the dialling and a convincing sense of where those controls sit. The swap from standby to active is a hold rather than a key, and the softkey work does not transfer at all, because the softkey row is the part of a G1000 that fixed keys cannot reproduce. So buy it for the knobs, and keep practicing the key presses in the aeroplane.

It also suits VR flyers, who never look at the hardware and need the knobs to stay where their hands left them, and anyone who has outgrown a single radio panel. Panel builders can mount the modules flush with no accessory and buy only the pack they need. Either way it is a better use of an evening than a mouse.

## The Magenta Standard evaluation

### 1\. Mechanics — 4.5/5

The forces that matter on an encoder are the weight of the detent and its resolution, and both are right here for setting a frequency one hundredth at a time. The detent is the encoder's own, and the plate underneath turns the sound solid rather than hollow, which is most of why it feels like aircraft hardware.

### 2\. Tactility — 4.0/5

The layout is learnable and the backlighting is even, so the hand finds heading and course without looking. The legends light from behind, through the printed text, so the labels stay readable in a dark room. The backlight has four steps including off, but there is no master switch, so the panel stays lit all night unless you step each module down by hand.

The silicone buttons flipping PFD and MFD light blue when pressed, but the autopilot keys do not show which mode is engaged, which costs nothing on a G1000 where those annunciations sit on the PFD. The layers keep this off a five: a module silently in the wrong mode looks identical to one that is right, and the second function of every control is a chord.

### 3\. Integration — 3.5/5

In X-Plane this is the cleanest hardware I have tested in the category. From 12.2.1 the sim sees the encoder modules as HID devices, you bind them in the joystick menu, and there is no driver, no app and no profile.

In MSFS the ready-made mapping runs through the app, but the device is standard HID, so the dependency is on the mapping rather than the hardware. Two things hold it at 3.5\. A GTN750 mode needs both packs. And owners on the vendor's Discord report three to five seconds of lag from the FMS encoder in that mode on the Black Square Duke and the FlySimWare C414, while the default aircraft show none. SimFlight could not reproduce it and the trail points at the aircraft. Test it before you buy, and try a wider pulse width first: it ships at 16 ms and adjusts to 56 in the vendor's config utility, and the manual says some pulses can be missed at 30 frames per second.

The boxes speak to the avionics rather than to particular aeroplanes, so the same panel flies a Cessna and a Baron without a new profile.

### 4\. Procedural — 4.0/5

The dialling transfers. The hand learns where the knobs sit, and after a few sessions a frequency change happens without the mouse and without looking down. The swap from standby to active is the exception, and it is the radio action you repeat most.

The button work transfers only in the analogue configurations. The bezel keys are presses the aircraft also makes, while the softkeys are a hold and the transponder digits sit on four separate knobs. A GNS 530 has none of those layers, which is why this scores well for that cockpit and only fairly for a G1000.

### 5\. ROI — 4.5/5

The four boxes are €300, about US$340 before shipping, and both parts of the desk mount add another €36\. Prices are the vendors' list, the mount is extra wherever a desk needs one, and the Octavi figure is quoted without VAT, so treat the gap as approximate. Singapore adds GST above S$400, which this order passes.

For eight dual concentric encoders with aluminium knobs, 24 buttons and a two-year warranty, I have not found a cheaper way to get that much of a Garmin panel under your hands.

The Octavi IFR-1 is a better single-unit answer for radio and autopilot at €152, with one dual-axis knob rather than eight. A lot of buyers will also compare this to a Stream Deck. The [Stream Deck + XL](https://www.elgato.com/us/en/p/stream-deck-plus-xl?ref=magentadebrief.com) is US$350 for 36 keys and six dials, and the + is US$200 for eight keys and four, so both cost more than the packs they would sit next to. The pulsAIR is about US$150 for 24 buttons and the rotAIR US$185 for eight knobs, and neither Stream Deck gives you a concentric knob. Their dials turn on one axis, and their labels are pixels, so your eyes go back to the desk.

A Stream Deck is far better at everything else because you can relabel any key in a minute and it will drive any aircraft you load. Buy one if what you want is programmable buttons. Buy this if you want your hands to learn a panel.

The unit is serviceable, which is rare here. SimFlight sells the encoder, the knob and the encoder with its board as separate parts, so one failed knob years from now does not write off the panel, and the two-year warranty transfers.

## Who should skip

- Anyone who wants one box on the desk
- Anyone who already runs a Stream Deck profile and wants programmable keys rather than aircraft-shaped knobs
- MSFS flyers who will not run a companion app or one of the other routes, because that is the price of admission on that platform
- G1000 students practicing the softkey-heavy parts of a procedure, where a 1.5-second hold is not the same rep as a tap

## What would change the verdict quickly

- Put the softkeys on a press for G1000 flyers, either by making them the primary layer or by adding a twelve-key strip under the display
- Ship the desk mount in the box, so a buyer does not spend €36 and thirty minutes before the panel is usable
- Add SFSmonitor to the pulsAIR page's Downloads tab, where the rotAIR page already lists it
- Show the module's mode on the hardware, or let the app set it, so changing aircraft is a dropdown rather than a chord pressed on each box
- Let one setting dim or switch off the whole panel, instead of stepping each module down
- Hold the modules with a clip or a lip in the plate, so a buyer does not need the thumbscrews first
- Add a single cable and a hub option so four modules can arrive as one USB connection

## The specification

- Eight dual-shaft concentric encoders across two modules, and 24 backlit buttons across two more
- Aluminium knobs on both shafts, with brass heat-set mounting inserts and a single USB-C port per module
- Every control with a press, a long hold and, on the encoders, a press-and-rotate
- GlassCockpit and Analog modes, with the FMS and RANGE encoders switchable between PFD and MFD, and backlighting in four steps including off
- One 1.8 m USB-C to USB-A cable per module, and four knurled thumbscrews in each pack
- 16 pulses per revolution per encoder, with pulse width adjustable from 8 to 56 ms
- 5.16 inches long per module, and the encoder pack ships at 0.49 kg
- Two-year warranty, covering manufacturing defects, and it transfers to a new owner
- Mounting sold separately: desk plate €18, inclined yoke stand €18, lateral monitor bracket €25, portrait front panel €15
- €300 for the four boxes before shipping, as €165 for the encoders and €135 for the buttons

## Frequently asked questions

**Do I need both rotAIR and pulsAIR to fly IFR?**

No. The rotAIR handles the rotary work on its own and the pulsAIR is a separate USB-HID device that adds buttons. Together they cover most of a GA panel, but each one works alone. The exception is GTN750 mode, which needs both.

**Can you practice a real G1000 procedure on it?**

Partly. The dialling transfers, and the six upper keys are the same six the aircraft has. The softkey row and the transponder code do not: the softkeys are a 1.5-second hold rather than a tap, and a transponder digit is a press-and-rotate on one of four knobs.

**Is it any good for a GNS 530 or an analogue panel?**

This is where it is strongest. Each radio, the heading bug, the baro knob and the OBS knob get their own encoder, the way a steam panel is laid out, and a GNS 530 has no softkey row to learn.

**Does the system need software to work in MSFS?**

Not for the device. For the vendor's ready-made mapping, yes: SFSmonitor is a free Windows app that connects over SimConnect. The modules are standard HID, and SPAD.neXt, FSUIPC, Air Manager, MobiFlight and Axis & Ohs are the documented alternatives. In X-Plane 12.2.1 and later the encoder modules bind natively; X-Plane 11 and earlier 12 need the vendor's .joy files.

**Which avionics does it control?**

G1000, G1000 NXi, GNS 530 and 430 and classic analog radio stacks out of the box, with G3000 and G3X through SFSmonitor in MSFS. SFSmonitor V6 adds G5000, which I have not tested. GTN750 mode also runs through SFSmonitor but needs both packs. Airbus A320 control requires the optional A32 front panels, which I was not sent and cannot comment on.